I’ve had an opportunity recently to get some hands-on with HyTrust’s Data Control product to do some data encryption of virtual machine disks in my Virtual SAN 6.0 environment. I won’t deep dive into all of the “bells and whistle” details about HyTrust – my good buddy Rawlinson has already done a tremendous job detailing that in this blog post. Instead I am going to go through a step-by-step example of how to use HyTrust and show how it prevents your virtual machine disk from being snooped. In my case, I am encrypting virtual machine disks from VMs that are…
I’ve been hit up this week by a number of folks asking about “ATS Miscompare detected between test and set HB images” messages after upgrading to vSphere 5.5U2 and 6.0. The purpose of this post is to give you some background on why this might have started to happen. First off, ATS is the Atomic Test and Set primitive which is one of the VAAI primitives. You can read all about VAAI primitives in the white paper. HB is short for heartbeat. This is how ownership of a file (e.g VMDK) is maintained on VMFS, i.e. lock. You can read…
There is a new snapshot format introduced in VSAN 6.0 called vsanSparse. These replace the traditional vmfsSparse format (redo logs). The vmfsSparse format was used when snapshots of VMs were taken in VSAN 5.5, and are also the format used when a snapshot is taken of a VM residing on traditional VMFS and NFS. The older vmfsSparse format left a lot to be desired when it came to performance and scalability. This KB article from our support team, indicating that no snapshot should be used for more than 72 hours, and snapshot chains should contain no more than 2-3 snapshots,…
One of the most common issues I got questions about in VSAN 5.5 was “why is VSAN deploying thick disks, when all of the documentation stated that VSAN deploys thin disks”? The answer was quite straight forward, and was due to the fact that the VMs were being deployed without a VM Storage Policy. This meant that it went through the standard VM deployment wizard which offered administrators the option of thin, lazy-zeroed thick (LZT) and eager-zeroed thick (EZT). The default option is LZT, which if you just do click-click-click (just like I do) when deploying a VM, then you…
I learnt something interesting about Virtual Volumes (VVols) last week. It relates to the way in which snapshots have been implemented in VVols. Historically, VM snapshots have left a lot to be desired. So much so, that GSS best practices for VM snapshots as per KB article 1025279 recommends having on 2-3 snapshots in a chain (even though the maximum is 32) and to use no single snapshot for more than 24-72 hours. VVol mitigates these restrictions significantly, not just because snapshots can be offloaded to the array, but also in the way consolidate and revert operations are implemented.
Recently I published an article on Virtual Volumes (VVols) where I touched on a comparison between how migrations typically worked with VAAI and how they now work with VVols. In the meantime, I managed to have some really interesting discussions with some of our VVol leads, and I thought it worth sharing here as I haven’t seen this level of detail anywhere else. This is rather a long discussion, as there are a lot of different permutations of migrations that can take place. There are also different states that the virtual machine could be in. We’re solely focused on VVols…
The embargo on what’s new in vSphere 6.0 has now been lifted, so we can now start to discuss publicly about new features and functionality. For the last number of months, I’ve been heavily involved in preparing for the Virtual SAN launch. What follows is a brief description of what I find to be the most interesting and exciting of the upcoming features in Virtual SAN 6.0. Later on, I will be following up with more in-depth blog posts on the new features and functionality.