If you’ve been following along on my NSX-T adventures, you’ll be aware that at this point we have our overlay network deployed, and our NSX-T edge has been setup to with DHCP servers attached to my logical switch, which in turn provides IP addresses to my virtual machines. This is all fine and well, but I’d also like these VMs to reach the outside world. NSX-T enables this through a feature called logical routers. In this post, I will talk you through how to configure a tier 0 logical router which connects to the outside world, a tier 1 logical router…
Hot on the heels of the vSAN 6.7 release, a new performance checklist for vSAN benchmarking has now been published on our StorageHub site. This is the result of a project that I started a few months back with my colleague, Paudie O’Riordan. It builds upon a huge amount of groundwork that was already done in this area by Andreas Scherr, one of our Senior Solutions Architects here in EMEA. The aim of this checklist is to get the best possible performance out of your vSAN deployment, typically during the Proof Of Concept (PoC) stage. We’ve had many situations where…
This week I attended KubeCon and CloudNativeCon 2018 in Copenhagen. I had two primary goals during this visit: (a) find out what was happening with storage in the world of Kubernetes (K8s), and (b) look at how people were doing day 2 operations, monitoring, logging, etc, as well as the challenges one might encounter running K8s in production. Let’s start with what is happening in storage. The first storage related session I went to was on Rook. This was a presentation by Jared Watts. According to Jared, the issues that Rook is trying to solve are to avoid vendor lock-in…
In my previous post, I showed how to deploy Pivotal Container Services (PKS) on a simplified flat network. In this post, I will highlight some of the issues one might encounter if you wish to deploy PKS on a more complex network topology. For example, you may have vCenter Server on a vSphere management network alongside the PKS management components (PKS CLI client, Pivotal Ops Manager). You may then want to have another “intermediate network” for the deployment of the BOSH and PKS VMs. And then finally, you may finally have another network on which the Kubernetes (K8s) VMs (master,…
This post will walk you through a simplified PKS (Pivotal Container Service) deployment in my lab. The reason why I say this is simplified is because all of the components will be deployed on a single flat network. PKS has a number of network dependencies. These include the bosh agents deployed on the Kubernetes (K8s) VMs being able to reach the BOSH Director, as well as the vCenter server. Let’s not get too deep into the components just yet – these will be explained over the course of the post. So rather than trying to set up routing between multiple…
Troubleshoot with the experts Next month will see the next technical support summit, which will be held in Cork, Ireland. This is a jam-packed 2-day event which will see our lead technical support engineers in EMEA deliver deep-dive technical troubleshooting workshops to attendees. This has something for everyone, ranging from vRealize Operations and Log Insight, to NSX, vSAN, vRealize Automation and Security. The full agenda is here:
Today VMware unveils vSphere version 6.7, which also includes a new version of vSAN. In this post, I am going to highlight some of the big-ticket items that are in vSphere 6.7 from a core storage perspective, and also some of the new feature that you will find in vSAN 6.7. I’ll also cover some of the new enhancements coming in Virtual Volumes (VVols).