After being asked about how vSphere Host Groups worked with Availability Zones in Enterprise PKS earlier this week, I decided to spend a little time setting it up in my lab and doing some testing to make sure I could understand the feature and its behaviour. Essentially what this feature allows you to do is to make use of the vSphere Host Group feature to group a bunch of ESXi hosts together. Then as one builds Availability Zones (commonly referred to AZs) in Enterprise PKS, a Host Group can be associated with an AZ. Anything that Enterprise PKS deploys to…
After deploying and configuring the Harbor tile in Pivotal Ops Manager, I ran into a couple of issues with certificates. The first was encountered when I was trying to login to harbor from an Ubuntu VM where I was running all of my PKS and BOSH commands. It was also the VM where I pulled my container images, and the VM from which I now wanted to push them into Harbor. Harbor is our registry server for storing container images. Here is what I got on trying to login: cormac@pks-cli:~$ sudo docker login -u admin harbor.rainpole.com Password: Error response from…
After a bit of a sabbatical, I am back to looking PKS (Pivotal Container Service) again. I wanted to look at the new version 1.3, but I had to do a bit of work on my environment to allow me to do this. Primarily, I needed to upgrade my NSX-T environment from version 2.1 to 2.3. I followed this blog post from vmtechie which provides a useful step-by-step guide. Kudos to our VMware NSX-T team as the upgrade worked without a hitch. My next step was to start work on the PKS deployment. I just did a brand new deployment…
It is almost 6 months since I last rolled out a deployment of Pivotal Container Service (PKS). I just did a new deployment this week using some of the more later builds of Pivotal Operations Manager (v2.3), and PKS (v1.2.2) and noticed a number of changes. This post is to take you through those changes and highlight where things are different and might catch you out. I am not going to go through all of the requirements from scratch – there are a number of posts already available which explain the command line tools that you need, and so on.…
As I am going to be doing some talks around next-gen applications at this year’s VMworld event, I took the opportunity to revisit Pivotal Container Services (PKS) to take a closer look at how we can set persistent volumes on container based applications. Not only that, but I also wanted to leverage the vSphere Cloud Provider feature which is part of our Project Hatchway initiative. I’ve written about Project Hatchway a few times now, but in a nutshell this allows us to create persistent container volumes on vSphere storage, and at the same time set a storage policy on the…
If you’ve been following along my recent blog posts, you’ll have seen that I have been spending some time ramping up on NSX-T and Pivotal Container Services (PKS). My long term goal was to see how these two products integrate together and to figure out the various moving parts. As I was very unfamiliar with both products, I took a piece-meal approach to both. First, I tried to get some familiarity with NSX-T. You can find my previous posts on NSX-T here: Building a simple ESXi host overlay network with NSX-T First steps with NSX-T Edge – DHCP Server Next…
In my previous post, I showed how to deploy Pivotal Container Services (PKS) on a simplified flat network. In this post, I will highlight some of the issues one might encounter if you wish to deploy PKS on a more complex network topology. For example, you may have vCenter Server on a vSphere management network alongside the PKS management components (PKS CLI client, Pivotal Ops Manager). You may then want to have another “intermediate network” for the deployment of the BOSH and PKS VMs. And then finally, you may finally have another network on which the Kubernetes (K8s) VMs (master,…