With all the buzz at VMworld 2019 this week, I thought I would highlight some of the cool new features that have been introduced with vSAN 6.7U3. In this release, there are 3 areas of focus, namely Unified Management, Intelligent Operations and Enhanced Performance and Availability. Let’s take a closer look at each of these. Unified Management Cloud Native Storage The primary initiative to providing unified management is our Cloud Native Storage feature. I’ve already blogged about CNS in a previous post. This is basically giving our vSAN Administrators the ability to gain insight into both virtual machine storage as…
vSAN 6.6 is finally here. This sixth iteration of vSAN is the quite a significant release for many reasons, as you will read about shortly. In my opinion, this may be the vSAN release with the most amount of new features. Let’s cut straight to the chase and highlight all the features of this next version of vSAN. There is a lot to tell you about. Now might be a good time to grab yourself a cup of coffee.
I recently noticed a blog post describing some very strange behaviors in 2-node and 3-node vSAN clusters. I was especially concerned to read that when they introduced a failure and then fixed that failure, they did not experience any auto-recovery. I have reached out to the authors of the post, just to check out some things such as version of vSAN, type of failure, etc. Unfortunately I haven’t had a response as yet, but I did feel compelled to put the record straight. In the following post, I am going to introduce a variety of operations and failures in my…
I spent the last 10 days in the VMware HQ in Palo Alto, and had lots of really interesting conversations and meet-ups, as you might imagine. One of those conversations revolved around the minimum VSAN configurations. Let’s start with the basics. 2-node: There are two physical hosts for data and a witness appliance hosted elsewhere. Data is placed on the physical hosts, and the witness appliance holds the witness components only, never any data. 3-node: There are three physical hosts, and the data and witness components are distributed across all hosts. This configuration can support a number of failures to…
There is a subtle difference in maintenance mode behaviours between VSAN version 5.5 and VSAN version 6.0. In Virtual SAN version 5.5, when a host is placed into maintenance mode with the “Ensure Accessibility” option, the host is maintenance mode continues to contribute its storage towards the VSAN datastore. In other words, any VMs that had components stored on this host still remained fully compliance with all of the components available. In VSAN 6.0, this behaviour changed. Now, when a host is placed into maintenance mode, it no longer contributes storage to the VSAN datastore, and any components that reside…
I’m currently neck-deep preparing for the next version of Virtual SAN to launch. As I prepare for all the new features that are coming (that I hope to be able to start sharing with you shortly), I’m still surprised by the misconceptions that still exist with regards to basic Virtual SAN functionality. The purpose of this post is to clear up a few of those.