VSAN 6.2 Part 8 – Upgrading VSAN Stretched Cluster from 6.1 to 6.2

This is an exercise that we ran through in our lab environment, and we thought that the steps would be useful to share here. By way of introduction, our 4 node cluster is split into a 2+2+1 configuration, where there are 2 ESXi hosts on site A (VLAN 4), 2 ESXi hosts on site B (VLAN 3), and a third site, site C (VLAN 80), hosting the witness appliance (nested ESXi host). All sites are connected over L3. In other words, static routes are added to each of the ESXi hosts so that ESXi hosts on site A can reach…

VSAN Design & Sizing – Memory overhead considerations

This week I was in Berlin for our annual Tech Summit in EMEA. This is an event for our field folks in EMEA. I presented a number of VSAN sessions, including a design and sizing session. As part of that session, the topic of VSAN memory consumption was raised. In the past, we’ve only ever really talked about the host memory requirements for disk group configuration as highlighted in this post here. For example, as per the post, to a run a fully configured Virtual SAN system, with 5 fully populated disk groups per host, and 7 disks in each…