You may remember an enhancement which we made to Storage I/O Control (SIOC) in the 5.1 vSphere release whereby SIOC can now automatically determine the characteristics and thus the latency threshold of a datastore. Prior to this change, SIOC used either a default value or had customers manually set it. Neither of these were ideal, so we introduced this automatic method. However, there was little detail on how often this latency threshold was calculated. In other words, did the calculation take place when SIOC was first enabled, or is there regular on-going calculations?
Just thought I’d bring to your attention something that has been doing the rounds here at VMware recently, and will be applicable to those of you using QLogic HBAs with ESXi 5.x. The following are the device queue depths you will find when using QLogic HBAs for SAN connectivity: ESXi 4.1 U2 – 32 ESXi 5.0 GA – 64 ESXi 5.0 U1 – 64 ESXi 5.1 GA – 64 The higher depth of 64 has been this way since 24 Aug 2011 (the 5.0 GA release). The issue is that this has not been documented anywhere. For the majority of…
This post is to look at two different technologies available in vSphere to manage the queue depth on your ESXi host(s). A queue determines how many outstanding I/Os can be sent to a disk. In the case of vSphere environments, where many hosts can be doing I/O to the same shared disk device, it can be helpful to throttle the LUN queue depth from time to time when congestion arises. In this post, we will compare and contrast Adaptive Queues with Storage I/O Control (SIOC).
This is a follow-up to my previous post on the 5.0U2. At the same time, VMware also released vCenter 5.1.0b. This post will look at the storage items which were addressed in that update, although the issues that are addressed in the storage space are relatively minor compared to the enhancements made in other areas. Note that this update is for vCenter only – there is no ESXi 5.1 update.
Hi all, Prior to the holidays, VMware released new versions of vCenter & ESXi on December 20th. There were new releases for both vSphere 5.0 & 5.1. In this post, I want to discuss release 5.0 Update 2. There were a number of notable fixes specific to storage which I wanted to highlight. I will follow-up with a look at storage enhancements in the new 5.1 release in a future post.
Welcome to part 3 of the NFS Best Practices series of posts. While part 1 looked at networking and part 2 looked at configuration options, this next post will look at interoperability with vSphere features. We are primarily interested in features which are in some way related to storage, and NFS storage in particular. While many of my regular readers will be well versed in most of these technologies, I’m hoping there will still be some items of interest. Most of the interoperability features are tried and tested with NFS, but I will try to highlight areas that might be…
In a few recent posts, I’ve been looking at performance counters in vSphere 5.1. One of my colleagues, Hugo Strydom, reached out to me about doing a vCenter Operations (vCOps) custom dashboard to monitor the new Storage I/O Control (SIOC) counters in vSphere 5.1 which I detailed here. Hugo has done a whole series of great blog posts on vCOps on his blog site. I thought it would really cool to get this setup on my environment and take a look.